Custom Copper Shower Pan Designs

Copper Shower Pan Designs

Bath Tubs And More Is A Custom Design Store. We Build Your Copper Shower Pan To Your Specifications. We Provide You With A Basic Line Drawing Of Your Copper Shower Pan. You Can Then Change Or Alter Any Measurements That You Wish. Once You Have Approved Your Line Drawing, Your Pan Is Built. Upon Completion, We Provide You With Photographs Of The Patina Finish And Final Measurements. No Product Ships Without The Customer’s Approval. All Images Are Copyrighted.

This Copper Shower Pan Was Built With A Short LH Side Wall, So That It Could Fit Up Against A Weight Bearing Beam In The Customer’s Bathroom.

This Copper Shower Pan Has Two And A Half Sides With A 1″ Tile Flange Added. Tile Flanges Are Optional. Normally, Our Pans Have A 2″ Top Rim On All Four Sides. This Pan Was Created With A 3 1/2″ W Front Rim And A 3 1/2″ W Partial LH Side Rim. You Will Notice The Rest Of The Pan Offers A 1/2″ Wide Rim, Where The 1″ Tile Flange Is Added. This Copper Pan Has One And A Half Finished Sides With A 3.5″ H Apron Front. The Sides With The 1″ Tile Flange Are Placed Against The Wall And Are Hidden.

Patina Finish: Old Penny Surface Texture: Hand Hammered “X” Drain Lines Added For Water Flow.

Designing Information: 1) Decide On The Overall Size Of The Pan 2) Choose Which Sides Are Finished And Unfinished 3) Choose The Width(s) Of The Top (4) Rims 4) Choose The Drain Hole Size And Location 5) Choose Whether To Add The “X” Drain Line, A Design Or Leave The Floor Plain 6) Choose Whether To Add A Tile Flange And The Flange’s Location 7) Choose The Patina Finish 8) Choose The Surface Texture Finish.

View Photos Of Completed Copper Shower Pans

Copper Rectangle Shower Pan. This Copper Shower Pan Was Designed With A 2″ W Top Rim On All (4) Sides. (2) Sides (LH Side / Back Side) Have A 1″ Tile Flange Added. The RH Side Which Is Exposed, Has A Finished Side (3.5″ High Apron) Plus A Double Flange Added For A Glass Wall To Be Installed. The Flange Will Help Support The Glass Wall, But The Glass Wall Still Needs To Be Solidly Anchored To The Ceiling And Side Wall For Structural Strength. Finished Sides Are The Sides That Will Be Seen. Unfinished Sides Are The Sides That Are Installed Against A Wall. Unfinished Sides Do Not Have An Apron Front, But Are Left Open. You May Add An Apron Front To Just One Side, Or All (4) Sides For A Freestanding Copper Shower Pan.

We Offer A Wonderful Selection Of Copper Patina Finishes To Choose From. You Can Even Add A Design To The Floor Of Your Copper Shower Pan. Choose From 200 Store Designs, Or Submit A Custom Design By Emailing A Photograph. All Orders Receive A Line Drawing To Approve The Design. You May Make Any Changes That You Wish To The Line Drawing. Once The Product Is Built, You Are Provided Final Measurements To Assure You The Order Was Built Correctly. No Order Ships Without Customer Approval First. Call Us At 800-989-5166.

Patina Finish Brown Dark. Surface Texture: Hand Hammered. One Finished Side With 3.5″ H Front Apron.

Looking For A Shower Bath Combination? You Can Build Your Copper Shower Pan As Deep As You Wish!

This Copper Shower Pan Was Built 10″ D. The Front Rim Is 4″ Wide With The Other (3) Side Rims 2″ W. (3) Sides Have A 1″ Tile Flange Added. Choose From A 2″ Or 3 1/2″ Drain Hole. Specify The Location Of Your Drain Hole.

We Walk Through The Designing Process With You, To Assure You That You Will Love Your Copper Shower Pan When Completed. Designing A Copper Shower Pan Is Far Easier Then It Appears. Call Us To Discuss Your Copper Shower Pan Design Today. Call 8oo-989-5166.

Copper Shower Pan Rectangle With Custom Designs Added. Choose From 200 Store Designs Or Email Us A Custom Design. Shown In Golden Bronze Patina.

Copper Shower Pan With 20″ H Rounded Seat. (2) Copper Walls Added, Also 20″ H. Build Walls To Any Height. Shown In Raw Copper Patina Finish.

Copper Shower Rectangle With Custom Cut Front Corner. Seat Has Double Flange Added To RH Side. Front Rim Also Has A Double Flange Added For A Glass Wall. Copper Walls Are 24″ H. Custom Designs Welcomed.

Custom Design Your Copper Shower Pan To Suit Your Installation Area. Added A 1′ H Tile Flange Or Add Copper Walls. You Can Even Add Designs To The Floor Of The Pan Or To The Walls. Everything We Build Is Custom – So The Options Are Endless. Call Us Today To Discuss Building A One Of A Kind Copper Shower Pan For Your Home.

How To Custom Design Your Pan: Email (Or Call Us) With The Measurements Of Your Pan. We Will Go Over The Design With You. With Your Paid Order, A Line Drawing Is Provided With Your Measurements. You May Change Any Of The Measurements Shown. Once The Final Design Has Been Approved, The Order Is Built. Once Built, We Provide You With The Final Measurements And Photos Of The Patina Finish For Your Approval. No Order Ships Without Customer Approval First.

Add 1″ Tile Flanges To Your Shower Pan. Build With A Short Apron Front To Accommodate Walls Or Post That May Exist In Your Installation Area.

Copper Shower Pan With Custom Cut Out Front Corner. Have A Wall Or A Beam In The Way? We Can Cut The Pan Out To Accommodate Your Installation Area. This Pan Has A Double 1″ H Tile Flange Added For A Glass Wall To Slide In To. For A LH / RH Side With A Finished Apron Front Exposed To The Room, Adding A Double 1″ H Tile Flange For A Glass Wall Works Great. You Will Need To Secure The Glass Wall To The Ceiling And Bathroom Wall, As The Flange Simply Provides An Area For The Glass Wall To Sit On, On Top Of The Pan’s Top Rim.